Skillnad mellan versioner av "SIDO Råmåttsmätning/en"

Från DataPolarna
Hoppa till: navigering, sök
(Skapade sidan med '= Installation of SIDO Board Measurement =')
 
(3 mellanliggande versioner av samma användare visas inte)
Rad 1: Rad 1:
 
Instructions for installing the caliper from Mahr and SIDO board measurement service.
 
Instructions for installing the caliper from Mahr and SIDO board measurement service.
  
= Installation of MarCom =
 
# Goto '''https://dam.mahr.com'''<br />[[Fil:Mahr1.png]]
 
 
= Installation of MarCom =
 
= Installation of MarCom =
 
# Goto '''https://dam.mahr.com'''<br />[[Fil:Mahr1.png]]
 
# Goto '''https://dam.mahr.com'''<br />[[Fil:Mahr1.png]]
Rad 21: Rad 19:
 
= Installation of SIDO Board Measurement =
 
= Installation of SIDO Board Measurement =
  
# Kör filen '''”SIDOBoardMeasurement.msi”'''
+
# Execute '''”SIDOBoardMeasurement.msi”'''
# Följ instruktionerna och installera programmet.
+
# Follow the instructions and install the application.
# I windows startmeny, leta reda på programmet '''”SIDO Board Measurement”'''. Högerklicka på det och välj '''”Kör som administratör”'''.
+
# In the Windows Start menu, locate the program '''”SIDO Board Measurement”'''. Right click on it and select '''”Run as administrator”'''.
# Ange sökvägen till '''KATALOGEN''' där .sido filen lagras (punkt 12 under MarCom installationen).
+
# Enter the path to '''DIRECTORY''' where the .sido file is stored (point 12 under MarCom installation).
# Ange den URL som du fått av oss i det andra fältet. <br />[[Fil:Sido1.png]]
+
# Enter the URL that you received from us in the second field. <br />[[Fil:Sido1.png]]
# Klicka på Starta service.
+
# Click on Start service.
# Programmet installeras som en tjänst i Windows.
+
# The program installs as a service in Windows.
# Öppna '''”Tjänster”''' i Windows och kontrollera att tjänsten körs. <br />[[Fil:Sido2.png]]
+
# Open '''”Services”''' in Windows and make sure the service is running. <br />[[Fil:Sido2.png]]
# Gör en mätning med värdet 0.0 <br />Om skjutmåttet inte redan är en registrerad mätare i SIDO kommer den att skapas och blir då synlig dels på administrationssidan i SIDO och valbar i råmåttsuppdrag på uppdragsskärmen.
+
# Make a measurement with value 0.0 <br />If the caliper is not already a registered meter in SIDO, it will be created and will then be visible both on the administration page in SIDO and  selectable in the measurement of dimensions on the assignment display.
# Skjutmåttet går nu att använda vid råmåttsmätningar.
+
# The caliper can now be used when measuring dimensions.

Nuvarande version från 25 november 2016 kl. 12.29

Instructions for installing the caliper from Mahr and SIDO board measurement service.

Installation of MarCom

  1. Goto https://dam.mahr.com
    Mahr1.png
  2. PIN-Code: L6L26
  3. Click ”PIN-Download” followed by ”Download” on next page.
  4. Download will start. The installation file is rather big, almost 100 Mb.
  5. When the download is complete, go to the directory where the file was saved and unpack the file ”MarConnect--MarCom_Standard--MarCom_5.1-2--SW—Standard.zip”.
  6. Execute ”S e t u p-MarCom.exe”.
  7. Follow all instructions and install all necessary drivers.
  8. The MarCom program starts automatically when the installation is complete. If it is not started, click on the MarCom icon on the desktop.
  9. Double click on the text ”Double Click Here”
    Mahr2.png
  10. Connect the USB-stick to the computer.
  11. Add measuring instrument - ”i-Stick”.
    Mahr3.png
  12. Select ”MarCal 16EWRi” and ”Transfer to -> Text File”
    Select where to save the text file.
    The name of the file becomes the name that the meter will have in SIDO.
    IMPORTANT! The file extension must be .sido
    Mahr4.png
  13. Connect to the meter by clicking the Connect icon in the same window (blue mark), not from the "home screen". Click OK and close the window.
  14. When the caliper is connected the ”connect-icon” becomes green and you will see the readings on the display.

Installation of SIDO Board Measurement

  1. Execute ”SIDOBoardMeasurement.msi”
  2. Follow the instructions and install the application.
  3. In the Windows Start menu, locate the program ”SIDO Board Measurement”. Right click on it and select ”Run as administrator”.
  4. Enter the path to DIRECTORY where the .sido file is stored (point 12 under MarCom installation).
  5. Enter the URL that you received from us in the second field.
    Sido1.png
  6. Click on Start service.
  7. The program installs as a service in Windows.
  8. Open ”Services” in Windows and make sure the service is running.
    Sido2.png
  9. Make a measurement with value 0.0
    If the caliper is not already a registered meter in SIDO, it will be created and will then be visible both on the administration page in SIDO and selectable in the measurement of dimensions on the assignment display.
  10. The caliper can now be used when measuring dimensions.