The first time you launch the app, you will be asked to sign in.

At the top right, there is an MP icon and an update icon. They make it possible to connect to the meter, view the status and synchronize the cloud.

Connect to meter

Press MP icon at the upper right. Select Meter in the dialogue. Make sure the meter is running, press and hold the button on the meter and make sure the led flash green ( it beeps also ) . You turn off the meter in the same way as you start it, when it flash red it is off.

MP icon turns green when connected to a meter, if you click on it then you have the option to disconnect.

Sync to the cloud

Pressing the sync button in the upper right ( two arrows in a circle).

When the phone syncs to the cloud saved measurement series are sent and user settings are downloaded.

After login a list of the last measurement series is shown. Here you can edit/create measurement series and see their status. A series of measurements can have 3 different colors

• Red: Not Saved
• Yellow: Saved but not in sync
• White : saved and synced .

Create new measurement series

Press the blue plus button. Fill in the required fields, woods, wood temperature and moisture meter (these fields can not be changed after the measurement series is created). Wood temperature can be entered manually or by measuring through the small pin on the moisture meter (requires that the cell phone is connected to a meter). Press on create.

Delete measurement series

Select a measurement series by pressing a while longer on a series. Delete selected measurement series by pressing the bin in the right corner. Saved measurement series that have been synced to the cloud will be deleted automatically at regular intervals (They will only be delete from the phone not the cloud).

Menu

Under the icon with three points you can choose to verify the meter to measurement block or to go into the settings.

After you have chosen to create/edit a measurements series you will get to the detail measurement series view. Here you can enter information about the measurement series as batch , kiln etc. You can create/ delete/exclude measurements and entering dry weights to the measurements. There are 4 tabs in the measurements series view, you can navigate between tabs by dragging your finger across the screen (left and right) or by pressing on the tabs. Save the measurement series by clicking the menu button ( three dots ) and then Save.

Information

This view has a variety of fields where you can enter information about the measurement series. The fields that are currently available are listed below.

Name

Make it easy to identify the series of measurements in a list of measurement series. Is automatically added as the user prefix and the current date (time). User prefix can be set in settings and on the Web.

Type of wood

Selected when creating a measurement series, can not be changed. Used to calculate the moisture content.

Wood temperature

Selected when creating a measurement series, can not be changed. Used to calculate the moisture content.

Moisture meter

Selected when creating a measurement series, can not be changed.

Batch

Free text with the option to choose a predefined batch that comes from any other system.

Kiln

Choose from the list, can be set via the web.

Drying program

Free text with the opportunity to select a previously entered value.

Dimension

Free text with the opportunity to select a previously entered value.

Sawing method

Free text with the opportunity to select a previously entered value.

Target moisture content

Choose from the list, can be set via the web.

Approved

Choose from the list, "not selected", "not approved" or "approved"

Share with other organizations

Choose from the list, you can only select organization that has been allowed to share to. Contact support if you want to share measurements to other organizations.

Notes

Free text

Measuring

Displays the last measurement and statistics about the measurements. You can take a new measurement by pressing the blue button. If you are not connected to a meter it says "Connect" on the blue button, but when you are connected it says "New measurement". If you want to delete the last measurement, you can press the bin top right.

Measurements

Displays a list of measurements. Exclude a measurement by pressing the eye on the right of each measurement. An excluded measurement is not counted in the statistics. Remove a measurement completely by first selecting it (by pressing and hold) then click on the bin.

Uncertain measurements are red and excluded measurements are slightly gray.

Dry Weights

Displays a list of dry weights. Dry weights are related to the measurements, so you have to have a measure to create a dry weight, and if you remove a measurement the related dry weight will also be removed.

Menu

In the menu ( three points at top right) you can.

Connect automatically

Make the phone connect to the moisture meter automatically

Remove

Delete the entire series of measurements !

Exclude min and max

Excludes minimum and maximum measurement.

Save

Saves the measurement series to the cloud.

It is possible to have multiple users on the same device, but it is done outside of the app. In Android is possible to create several user. It is usually done by going into Settings/users, but it looks different on different devices.

The app allows a MoistPal account per user . But a device can have multiple users.

Older Android devices does not support multiple users.

Verifera mot mätblock funktionen hittar man under de tre punkterna när man är på start skärmen (mätserie listan). När man klickar på knappen får man välja mätare om man inte redan är ansluten till en. Efter det så kommer man in till gränssnittet som syns på bilden. För att göra en mätning så sätter man mätaren mot en av test punkterna på mätblocket och trycker på samma test punkt i appen. När man har mätt alla testpunkter trycker man på spara ikonen nere i högra hörnet. Då kommer verifieringen att sparas till molnet.